About us
Policies
Links
FAQ
Calculator
Accessories
Chemicals
Deionization
Filters
Fittings
Housings/Brackets/Clips
Meters & Controllers
Pumps
Booster & Delivery Pumps
Peristaltic Dosing Pumps
VorTech & MaxiJet
Permeate Pumps
Controls & Accessories
Refractometers
RO Membranes
RO Systems
RO/DI Systems
Solenoid Valves
Storage Tanks
Strainers/Screens
Tubing
Tank/Top Off Controllers
BFS-310
Pump Wrench - $1.79
This wrench is used to adjust the pressure output of the Aquatec 8800 booster pump.
BFS-298
Strainer, 1/4 inch - $11.98
Aquatec recomends use of a filter ahead of booster pumps. This strainer has two 1/4 inch quick connect fittings. Internal strainer can be removed, cleaned, and replaced.
BFS-334
Strainer, 3/8 inch - $12.98
Aquatec recomends use of a filter ahead of booster pumps. This strainer has two 3/8 inch quick connect fittings. Internal strainer can be removed, cleaned, and replaced.
BFS-215
Pressure switch 1/4 inch - $19.99
This pressure switch includes 1/4 inch quick connect fittings and automatically turns the booster pump on when pressure in the system is low, and turns the pump off when pressure is high (for example when the pressure tank is full or when a float valve closes).
BFS-5008
Pressure switch 3/8 inch - $19.99
This pressure switch includes 3/8 inch quick connect fittings and automatically turns the booster pump on when pressure in the system is low, and turns the pump off when pressure is high (for example when the pressure tank is full or when a float valve closes).
BFS-5162
Low Pressure Switch - $19.99
Switch opens circuit when pressure falls below 3-5 psi. Has a single 1/4" FNPT port and includes a aquatec-compatible wiring harness with two spade connectors and two aquatec-style plugs.
BFS-5012
Wiring Harness Pigtail - $4.79
Use this pigtail to easily add devices to your booster pump wiring harness.
BFS-5067
Flow Switch - $12.75
This water flow switch is a simple relay control to turn a device on or off if water is flowing or not. Includes a convenient telephone jack style connector (modular jack). CE marked. 1/4" quick-connect fittings. 36 inch cable length. Switch measures 0.75” in dia. x 2.5” long. Minimum activating flow rate is 0.08 gallons/minute. Maximum pressure 150 psi. Wetted surfaces are polycarbonate.
BFS-5011
Aquatec Rubber Pump Foot - $1.49
Replacement rubber foot for steel Aquatec booster pump bracket.
Accessories
Chemicals
Deionization
Filters
Fittings
Housings/Brackets/Clips
Meters & Controllers
Pumps
Refractometers
RO Membranes
RO Systems
RO/DI Systems
Solenoid Valves
Storage Tanks
Strainers/Screens
Tubing
Tank/Top Off Controllers
Value Series
Premium Series
Drinking water kit
Residential Series
Auto Shut Off Valves
Faucets
Float Valves
Flow Restrictors
Flush Kits
Pressure Gauges
Other
MAGflake
Calcium Chloride
Carbon
GFO - Phosphate Remover
Kalkwasser
Add-on DI kits, standard -size
Add-on DI kits, jumbo
Silica-Trap Deionization
Ammonia-Trap Deionization
DI resin, color changing
DI resin, non-color changing
Cation Resin
Anion Resin
Filter kits
Specialty filters
Sediment
Carbon/GAC
Refillable Cartridges
Supply Fittings
Valves
Tees
Elbows
Straight/Males
Straight/Females
Bulkheads
Nipples
Other/Miscellaneous
Hanna Checkers
Handheld Meters
In-line Meters
Controllers
Accessories
Replacement Sensors
Booster & Delivery Pumps
Peristaltic Dosing Pumps
VorTech & MaxiJet
Permeate Pumps
Controls & Accessories
1/4 Inch
3/8 Inch
1/2 Inch
Value Series
Premium Series
Reef/Residential RO/DI System
Chloramine Special
